State of MN doesn’t think so and has adopted a new energy code.
Most realtors and homeowners don’t realize since June 1, 2009 our housing has been subject to new residential energy requirements. If interested you can download the full Energy Code called Chapter 1322 at www.dli.state.mn.us/ccld/pdf/sbc_1322.pdf
The entire MN Energy Code is essentially about 2 principles…
This is all about the rate of energy loss through the shell of the building. Heat loss is caused by the continuous energy load within the house which is called Base Load. This includes things such as lights, water heating, and cooking power. We can control these losses by installing more efficient appliances and devices. Outside air temperature also effects heat loss and this is called Seasonal Losses. These losses are reduced by the proper installation of quality insulation, vapor barriers, and efficient sealing.
Because our homes have become so tight the rate of air exchange is practically nothing. The new code requires a complete air change each hour. Half of the air in a home can be exchanged by a continuously operating mechanical system and the other half by a passive means, like opening a window. This can be accomplished with kitchen and bath exhaust fans that run continuously, but this isn’t the most efficient method. A better way are with either a heat recovery ventilator (HRV) or energy recovery (ERV), but this way is very expensive.
Without these 2 principles in balance and working together, there can be great risk to the air quality of the home.
Can you hear the whisper of stale air or mold?
MN Home Inspector, Minneapolis & St. Paul
ASHI certified inspector
Kaplan University, Home Inspection Lead Instructor
Rob ‘Pops’ Leslie
Kaplan Professionals, Retired